With the introduction of the FR-CS80 series, Mitsubishi Electric came up with a frequency inverter
with general purpose magnetic flux vector control, which compact
dimensions are achieved by the low heat design. It is
space-saving due to side-by-side installation and easy to maintain.
Applications: spinning, conveyor, fan and pump,
fountain, wood processing machine, food machinery.
Space saving through side-by-side mounting
Side-by-side installation is possible*. Three
FR-CS84-012- 60 inverters are installed in the room for two
conventional models to save space. A DIN rail mounting option can
are used. (FR-UDA [] [])
* Keep the ambient air temperature of the inverter
at a maximum of 40 ° C.
High performance
Compact yet high performance
General functions for magnetic flux vector control and
auto tuning are available. These functions are for the applications that require a
requiring high starting torque, such as washing machines, agitators and transfer machines
including conveyor belts, hoists and lifts.
• A high torque of 150% / 1 Hz is achieved
• Auto tuning With the "non-rotation" auto tuning
function the motor constant (R1) can be calculated automatically.
Brake unit connection
The brake unit can be connected via terminal P/+ and terminal
N/-. It is useful for applications requiring regenerative braking torque
during deceleration, such as transfer machines
When using the converter with the brake unit, use
the inverter FR-CS84-050-60 or higher.
Optimal excitation control
The excitation current is constantly adjusted to the
optimum value to drive the engine as efficiently as possible. With a small
load torque, significant energy savings can be achieved.
Easy to use
Easy to read control panel
An optional LCD control panel (FR-LU08) is available.
Control panel FR-PA07 enables the operation of the inverter
possible and monitors the frequency setting from the housing surface.
Parameter unit FR-PU07
The parameter unit provides convenient settings, such as
direct input with keypad,
operation status display and help function. Eight languages are supported.
Parameter settings for up to three units can be saved.
Shorter start-up time with easy installation
Configuration software FR Configurator 2. The software is
easy to use and there is a free trial available, which
contains start-up functions. It can be downloaded from the Mitsubishi Electric FA
Global Website
Support for fast communication
RS-485 communication
Using a controller, the inverter can be controlled via a network
and monitored. The standard model with an RS-485 interface
(Mitsubishi inverter protocol, MODBUS RTU protocol) enables communication
with a speed up to 115200 bps
Easy maintenance
Less time spent checking wiring
The wiring can be checked by removing the cover of the
to lift the control terminal, which makes maintenance work easier.
Simple wiring
Spring Clamp Connections
Simple wiring
The wiring with the special flat plug can be plugged in straight away. Without
using the flat plug, the loose wires can also be connected
with a flat screwdriver.
High reliability
Internal clamp contacts are spring-shaped. This allows
wires are protected against loosening or contact failure due to vibrations during
use on a bogie or during transport.
Maintenance free
Additional tightening of screws is not necessary.
Other features:
General purpose magnetic flux vector control
Optimal excitation control
Shorter start-up time with easy installation
Easy connection with GOT
Protected in hazardous environments
EMC Directive Compliant Noise Filter
The inverters are compatible with UL, cUL and EC directives (CE marking).
Complies with EU RoHS Directive (restriction of the use of certain
hazardous substances in electrical and electronic equipment)
